Features
| Use Barcode Reader (UPC/EAN/JAN, Code39, Code11, Code32, Interleave25, Industrial25, Code128, Code93) |
| Standalone or PC on line through JAS software. |
| With backlit keypad & LCD. |
| Programmable door delay close time from 0~255 seconds, when door unlock over delay time setting, the alarm will output. |
| Support 10000 users when PR-90C under standalone situation. |
| Can be used by 0.18cm,0.76cm EM card or Key tag. |
| Built-in clock and calendar. |
| Built-in RS232 & RS485 interface. |
| PR-90C can save 10000 history record. |
| Reader ID can be setting through Dip switch. |
| Built-in Watch Dog, the system never hang . |
| Built-in tamper switch detects when case is forced open or destroy, the alarm signal output (A. B. point). |
| Data is protected even after power failure . |
| Inside door can be installed a push button for outdoor access control. |
| With real-time printing function (RS232 port), can be connected to a serial printer. |
| Operation mode: Card Only, Card + PIN, PIN or card, Facility Code only Opening, or inhibit Access. |
| Intranet network with TCP/IP Converter (option device). |
| Two different housing as the picture for choice. |
Configuration :

Specifications
| LCD | 2X16 Characters (backlit LCD) |
| Keypad | 4X4, 16keys |
| Power requirement | DC 12V 1Amp |
| Operating temperature | 32°F~122°F(0°C~50°C) |
| Humidity | 20%~90%RH |
| Dimensions | 160(L) X 185(W) X48(H) mm |
| Relay | 3 relay contact (Max. DC 12V 1Amp) |
Ordering Information

| Manufacturer | No |
|---|
